品牌:特兰森
型号:NKP-1
适用范围:适用范围 喷涂内孔Ф50-Ф300mm的管道
品牌:特兰森
起订:1台
供应:600台
发货:3天内
国内顶级☆超长寿命☆价格优惠☆
【NKP-1型管道内壁喷涂器】
NKP-1 type pipe inner wall spray device
NKP-1型管道内壁喷涂器适用于小孔及中型管道的内壁涂装，它是利用无气喷涂机输送来的高压涂料，通过特制的喷嘴，使涂料雾化后直接形成喇叭形（园锥形、空心），均匀地喷在管道内表面，从而实现管道的涂装。
NKP-1型管道内壁喷涂器主要适用于Ф50-Ф300mm的管道，涂料粘度不得高于80秒（4号福特杯）。如果涂料粘度高于80秒，需加溶剂稀释。
NKP-1型管道内壁喷涂器基本上不受管道长度限制，但最好不长于15米。
NKP-1-type pipe inner wall spray device is for bore and medium-sized pipe inner wall coating, high-pressure paints which transfers from the airless spray coating machine and goes through a special nozzle is formed a trumpet (Cone -shaped, hollow), evenly spray the inner surface of the pipe which lead to successful pipe coating.
NKP-1 type is mainly applied in Ф50 - Ф300mm pipes, paint viscosity shall not exceed 80 seconds (No. 4 Ford cup). If the pait viscosity is higher than 80 seconds, solvent should be added for dilution.
NKP-1 type basically is unaffected by pipe length, but preferably pipe length is not longer than 15 meters.
主要技术参数Technical parameters
|
型号Model |
NKP-1 |
|
喷涂管道内孔范围Spray pipe bore range (mm) |
Ф50-300 |
|
机身长度Body length (mm) |
Ф50×280(长) |
|
机身重量Body weight (kg) |
0.9 |
|
涂料控制开关手喷枪重量Paint control switch (spray gun ) weight |
0.45 |
外形结构:
1.喷嘴 2.滚轮 3.支架 4.导流管5.调节手轮 6.高压软管 7.SPQ2手喷枪
安装方框图
安装示意图
