点击图片查看原图
Kocour Coulometric Thickness Testing Accessories and Modules
Product Features
Wire Accessory WT Determines the thickness of plating on wire. Stand WT plugs directly into 6000 and measures the thickness of plating on wire from 8 to 45 gauge. Can also be used for evaluation of inter-metallic layers and other special wire applications. Meets ASTM B-298, B-355.
Thermal SPC Processor The economical DP-1VR Processor is versatile, quiet and easy co use with simple 4 key operation. The 1W wide printer provides both a hard copy of tester readings and an SPC analysis in mathematical and chart form. Data pores provide easy hookup to PC (software needed).
Thickness Standards To insure the accurate performance of the 6000, a periodic check should be made utilizing Kocour Thickness Standards. These uniformly plated discs guarantee accurate measurement. When necessary, calibration adjustments are easily made. Traceable N.I.S.T.
NF6M Stand Versatile and simple with connecting cable and air agitation system. Consists of base, vertical arm, horizontal arm, cell and stirrer assembly. Other stands available. Accessories to accommodate bumpers, large odd shapes, flat stock & small parts are also available. Vise is an optional accessory.
Program Modules Programmable by application dedicated plug-in module. Program Module A Test spot diameter: 0.136". Supplied as standard equipment with each new unit. Designed for general use.
Program Module B Test spot diameter: 0.10". For measuring smaller parts and recessed or ledged areas which are not accessible with standard instrumentation.
Program Module C Test spot diameter: 0.063". For small parts.
Program Module D Test spot diameter: 0.030". For very small parts, such as miniature contacts and all types of fasteners. Requires special accessories.
